The company established an emergency medical division in 2019, which mainly produces various types of protective clothing, masks, first aid kits, auxiliary material kits, sanitary backpacks and other products. A 100000 level clean workshop will be built. The walls and roof plates of the purification workshop are made of sandwich color steel plate, and the ground of the purification workshop is made of epoxy self flow floor, which can prevent static electricity. The high-efficiency air supply outlet is made of stainless steel frame, beautiful and clean, and the perforated mesh plate is made of baked paint aluminum plate. The main function of the clean room is to control the cleanliness, temperature and humidity of the atmosphere contacted by the products, so that the products can be produced and manufactured in a good environmental space. The ventilation rate of the clean room shall not be less than 15 times / h. The number of particles with the allowable value of dust particles above 0.5 microns shall not exceed 3.5 million, and the number of particles above 5 microns shall not exceed 20000. The temperature in winter is more than 16 ℃± 2 ℃, the temperature in summer is less than 26 ℃± 2 ℃, and the relative humidity is 45-65%. The disposable medical surgical mask (sterile) has obtained the medical device registration certificate. The registration certificate No.: jzz 20202140684. The product meets the standard of medical surgical mask (yy0469-2011). Masks are packaged in Chinese and English. There are two packaging methods for Chinese packaging, one for each bag, 10 for each box and 100 for each box; 10 in each bag, 50 in each box and 1000 in each box. Packed in English, 10 in each bag, 50 in each box and 1000 in each box.