Hot dip galvanized tube is to make molten metal and iron matrix reaction and produce alloy layer, so that the matrix and coating of the combination of the two. Hot dip galvanizing is the first steel pipe pickling, in order to remove iron oxide on the surface of the steel pipe, pickling, through ammonium chloride or zinc chloride aqueous solution or ammonium chloride and zinc chloride mixed aqueous solution tank for cleaning, and then into the hot dip plating tank. Hot dip galvanizing has the advantages of uniform coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the steel tube matrix and the molten plating solution to form a tightly structured zinc-ferroalloy layer with corrosion resistance. Alloy layer is integrated with pure zinc layer and steel tube matrix. So its corrosion resistance is strong.
first, galvanized layer uniformity: steel pipe samples in copper sulfate solution impregnated for 5 times shall not become red (copper plating color).
second, surface quality: the surface of galvanized steel pipe should have a complete galvanized layer, there shall be no black spots and bubbles on the plating, allowing the existence of small rough surface and local zinc tumor.
third, galvanized layer weight: according to the requirements of the buyer, galvanized steel pipe can be used for zinc layer weight determination, the average value should not be less than 500g/ square meter, any sample shall not be less than 480g/ square meter.
Scope of application: conveying water, air, heating steam, gas and other low-pressure fluids; Mechanical, construction and other structural purposes.
Galvanized steel pipe has the following production steps:
Black parts inspection → hanging material → degreasing → rinsing → pickling → cleaning → dipping agent → hot air drying → hot dip galvanizing → cooling → passivation and rinsing → unloading → inspection, dressing → packaging warehousing and transportation.