Water-based fluorocarbon faux galvanized finish(XGE-930)
Product Overview
This product is a special top coat for galvanized parts, contains waterborne fluorocarbon resin, polyurethane and other raw materials. It can solidify below 5℃, provides good weatherability with relatively small color changes in a complex environment.
Typical Application
It can be applied to the surface coating upon steel structures, galvanized items, galvanized items in the highly corrosive environment, such as railway vehicles, iron towers, bridges, containers, oil-field facilities and gas pipelines.
Color
Silvery white.
Product Data
Property Measurement standard Description
Room temperature Natural drying
Solid content ISO 3233 60±2%
Glossiness (60°) ISO 2813 40-65
VOC 17g/L
Surface drying 20 ℃ 15min
Entirely drying 24h
Recommended Coating In Each Layer
Film thickness & coating rate Wet film thickness Dry film thickness Theoretical rate of coating
(μm) (μm) (L/m2)
Min (One layer) 110 40 4-6
Max (Two layers) 200 80 7-9
Surface Treatment
Before coating, check if the surface coat is dried or not, oil-contaminated or not, lime-contaminated or not. Ensure the surface with no damage before coating.
No rain wash within 10 hours after coating.
Engineering Method
Stir evenly the paint after unpackaging, and leave it for 10 minutes and do the coating. Spraying, roller painting and brushing are accepted. It shall be noted that the thickness of each coat shall comply with the stipulation.
Diluent And Amount
Diluent is water, and the amount is 10%.
Packaging
Plastic drum or tin bucket, 5L, 10L,20L, 50L respectively.
Health And Safety
This product is environment-friendly, hazard-free, non-inflammable, non-explosive, no potential safety hazard.
Wash with clean water in the case of any touch with clothes or eyes.
Expiration Date
12 months after being sold out of the factory.
Anhui SGTECH Coating Technology Co., Ltd